 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Impuls-Laserdiode im Plastikgehause 25 W Spitzenleistung Pulsed Laser Diode in Plastic Package 25 W Peak Power Lead (Pb) Free Product - RoHS Compliant SPL PL90 Besondere Merkmale * Kostengunstiges Plastikgehause * Zuverlassiges InGaAs/GaAs kompressiv verspanntes Halbleiter-Material * Hochleistungslaser mit Large-Optical-Cavity" (LOC) Struktur fur ein schmales Fernfeld * Laterale Austrittsoffnung 200 m Anwendungen * * * * Entfernungsmessung Sicherheit, Uberwachung Beleuchtung, Zundung Test- und Messsysteme Features * Low cost plastic package * Reliable strained InGaAs/GaAs material * High power large-optical-cavity (LOC) structure for a narrow far-field * Lateral laser aperture 200 m Applications * * * * Range finding Security, surveillance Illumination, ignition Test and measurement systems Sicherheitshinweise Je nach Betriebsart emittieren diese Bauteile hochkonzentrierte, nicht sichtbare InfrarotStrahlung, die gefahrlich fur das menschliche Auge sein kann. Produkte, die diese Bauteile enthalten, mussen gema den Sicherheitsrichtlinien der IEC-Norm 60825-1 behandelt werden. Typ Type SPL PL90 Safety Advices Depending on the mode of operation, these devices emit highly concentrated non visible infrared light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions given in IEC 60825-1 "Safety of laser products". Opt. Spitzenausgangsleistung Opt. Peak Power 25 W Wellenlange Wavelength 905 nm Bestellnummer Ordering Code Q62702P1760 2006-04-12 1 LASER COMPONENTS IG, Inc., 9 River Road, Hudson, NH 03051 - USA, Phone: +1 603 821 7040, Fax: +1 603 821 7041, info@laser-components.com SPL PL90 Grenzwerte (TA = 25 C) Maximum Ratings Parameter Parameter Spitzenausgangsleistung Peak output power Durchlastrom Forward current Pulsbreite (Halbwertsbreite) Pulse width (FWHM) Tastverhaltnis Duty cycle Sperrspannung Reverse voltage Betriebstemperatur Operating temperature Lagertemperatur Storage temperature Lottemperatur (tmax = 10 s, 2 mm von Gehauseunterseite) Soldering temperature (tmax = 10 s, 2 mm from bottom edge of case) Symbol Symbol min. Werte Values max. 30 40 100 0.1 3 + 85 + 100 + 260 W A ns % V C C C - - - - - - 40 - 40 - Einheit Unit Ppeak IF tp d.c. VR Top Tstg Ts 2006-04-12 2 LASER COMPONENTS IG, Inc., 9 River Road, Hudson, NH 03051 - USA, Phone: +1 603 821 7040, Fax: +1 603 821 7041, info@laser-components.com SPL PL90 Optische Kennwerte (TA = 25 C) Optical Characteristics Parameter Parameter Zentrale Emissionswellenlange1) Emission wavelength1) Spektrale Breite (Halbwertsbreite)1) Spectral width (FWHM)1) Spitzenausgangsleistung1) Peak output power1) Schwellstrom Threshold current Betriebsspannung1) Operating voltage1) Minimale Anstiegs- und Abfallzeit (10% ... 90%) Minimum rise and fall time (10% ... 90%) Austrittsoffnung Aperture size Strahldivergenz (Halbwertsbreite) Beam divergence (FWHM) Temperaturkoeffizient der Wellenlange2) Temperature coefficient of wavelength2) Temperaturkoeffizient der opt. Ausgangsleistung Temperature coefficient of optical power Thermischer Widerstand Thermal resistance 1) Symbol Symbol min. peak 895 - 20 0.5 3.3 - Werte Values typ. 905 7 25 0.75 4.3 1 max. 915 - 30 1.0 5.3 - Einheit Unit nm nm W A V ns Pop Ith Vop tr , tr wxh || x / T Pop/PopT - - - 200 x 2 11 x 25 - 0.28 -0.4 - - m2 Grad deg. nm/K %/K Rth JA - 160 - K/W Standardbetriebsbedingungen beziehen sich auf eine Pulsbreite von 100 ns bei einer Frequenz von 1 kHz und einem Betriebsstrom von 30 A bei TA = 25 C. Standard operating conditions refer to pulses of 100 ns width at 1 kHz rate with 30 A operating current at TA = 25 C. 2006-04-12 3 LASER COMPONENTS IG, Inc., 9 River Road, Hudson, NH 03051 - USA, Phone: +1 603 821 7040, Fax: +1 603 821 7041, info@laser-components.com SPL PL90 Optical output power Popt and forward voltage VF vs. forward current IF (TA = 25 C) 5 V OHL00751 Optical spectrum, relative intensity Irel vs. Wavelength (TA = 25 C, Popt = 25 W) 1.00 % OHW00913 VF 50 WP opt rel 4 40 0.75 3 30 0.50 2 20 1 10 0.25 0 0 10 20 30 0 A 40 IF 0 880 890 900 910 nm 930 Far-field distribution parallel to junction Irel vs. || (TA = 25 C, Popt = 25 W) 1.00 OHL00752 Far-field distribution perpendicular to junction Irel vs. (TA = 25 C, Popt = 25 W) 1.00 OHL00753 Irel 0.75 Irel 0.75 0.50 0.50 0.25 0.25 0 -30 -20 -10 0 10 Deg 30 0 -40 -30 -20 -10 0 10 20 Deg 40 2006-04-12 4 LASER COMPONENTS IG, Inc., 9 River Road, Hudson, NH 03051 - USA, Phone: +1 603 821 7040, Fax: +1 603 821 7041, info@laser-components.com SPL PL90 Mazeichnung Package Outlines Chip position Cathode Area not flat 0.6 (0.024) 0.4 (0.016) 0.8 (0.031) 0.4 (0.016) 2.54 (0.100) mm spacing X Bottom view 5.9 (0.232) 5.5 (0.217) Y 1.8 (0.071) 1.2 (0.047) 29.0 (1.142) 27.0 (1.063) 5.0 (0.197) 4.2 (0.165) 0.6 (0.024) 0.4 (0.016) Detail X 0.1 (0.004) ... 0.7 (0.028) Detail Y 5.1 (0.201) Chip position o0.3 A A GEOY6066 5 5 3.5 (0.138) 3.7 (0.146) Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). 2006-04-12 5 LASER COMPONENTS IG, Inc., 9 River Road, Hudson, NH 03051 - USA, Phone: +1 603 821 7040, Fax: +1 603 821 7041, info@laser-components.com 1.7 (0.067) 1.9 (0.075) 4.8 (0.189) SPL PL90 Published by OSRAM Opto Semiconductors GmbH (c) All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2006-04-12 6 www.lasercomponents.com Issue: 04/07 / V1 / HW / osram/ spl-pl90.pdf LASER COMPONENTS IG, Inc., 9 River Road, Hudson, NH 03051 - USA, Phone: +1 603 821 7040, Fax: +1 603 821 7041, info@laser-components.com |
Price & Availability of SPLPL90
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |